• Once unetbootin is installed, insert your flash drive and start unetbootin (such a weird name...)
• Select the flash drive fro the combo box at the bottom, in Linux it's usually /dev/sdd1 for me.
• Select the distribution FreeDos1.0
• Click OK.
• After unetbotin does its thing, it will ask you to reboot. DON'T YET.
• Move the contents of EN011IMS.10G onto the flash drive.
• If the machine you are using unetbootin is the MSI Wind that you're going to put Mac OS X 10.6.8 on, then reboot, otherwise don't and take the flash drive out.

4. Reflash your BIOS.

Adam showed you how to build a desktop 'Hackintosh' PC running a version of Mac OS X Leopard, and now Jose Perez at Planetx64.com gets the job done on a mini laptop—specifically, the MSI Wind. ว้าว, Jose @ Planetx64x มีขั้นตอนที่ดีในการติดตั้ง Mac OS X บน MSI Wind เล็ก ๆ สุดมันเป็น pockable Mac เกือบ - ผ่าน / เมื่อเร็ว ๆ นี้ฉัน.

• Stick the flash drive in the MSI Wind and (after being a good little boy scout and backing up any data you need), boot it up.
• After a bunch of hooplah, you will come to a menu, make sure you select option 2, the FREEDOS Safe mode (Don't load any drivers).
• Let it do it's thing.

Under NO CIRCUSTANCES are you to stop the reflashing process once you have started it. If you do, you will seriously damage your system. I'm not even close to kidding.
Congratulations, you have reflashed your BIOS. Grab a steak and feel manly.
STEP 2 - Installing 10.6.2

• Grab your Hazard 10.6.2 DVD, and put it into your external DVD/CD drive.
• Once you get a screen that gives you options, click on the top bar and select Disk Utility from the menu.
• Partition your drive to have a MAC OS X journaled, case sensitive partition.
• Let it do its thing.
• Go forward in the process until you come to a screen that gives you a button in the lower left corner that reads, 'Customize'. Click said button.
• Choose the following;

• 10.6.2 update
• the 2nd Chameleon bootloader
• Intel Atom kernel
• don't mess with anything else...

Install... Take your girlfriend out for another dinner... Seriously...

STEP 3 - Post install

• With the hazard disk still in the drive, reboot the computer and hit F8 when prompted for boot options.
  
• Type '-s' and hit enter.
  
• Let it do it's thing. You should end up with a prompt. You are now in what's called single user mode.

MAKE SURE THAT YOU DOUBLE CHECK YOUR SPELLING AND TYPING WHILE IN SINGLE USER MODE.

• Enter in the following commands;

Explanations:
mount -w -t hfs /dev/disk0s1 /Volumes
(Mounts the installation partition to a directory called 'Volumes' in the root of the DVD.)
mount -uw /Volumes
(Grants you write privileges to the directory '/Volumes')
cd /Volumes/System/Library/Extensions
(Changes current working directory to '/Volumes/System/Library/Extensions')
rm -rf AppleIntel*
(Deletes all kexts that start with 'AppleIntel')
rm -rf Sleepenabler.kext
(Deletes Sleepenabler.kext, if you don't do this you may get a kernel panic, if you do, just repeat the process of booting into single user mode, and delete the kext)
cd ..
(Moves one directory backwards, so your working directory should be '/Volumes/System/Library')
rm -rf Caches
(Deletes the 'Caches' directory.)
reboot
(Um, it ... reboots your system...)
Once you reboot, you should have a working system. Type in all the information that you wish (except user account, that's kind of mandatory, I never register or fill out the registration info.)
Step 4 - Updating to 10.6.8
Nifty, huh? Well, stop admiring the desktop and get back to work.

• Transfer the 10.6.8 Combo update, the legacy kernel, VoodooHDA and the IntelGMA950 kexts to the desktop. (You have a flash drive remember?)
• Extract the legacy kernel to the desktop, a double click is all it takes.
• Install the 10.6.8 combo update. WARNING: If you try to install the update package and get 'An unknown error', hit ALT - L and take a look at the Installer Log. if it says something to the effect of 'security certificate not valid', you need to move the date back. Right click on the date at the top-right of the screen, just subtract a year, and hit save. Seriously. It should install now. This had me stumped for 2 days... Be warned...
  
• When the update finishes, it will tell you to reboot. IGNORE IT FOR A MINUTE!
• Open up a terminal. (Applications > Utilities) and type in the following commands;

• Upon doing this you will be asked for the password you entered when you created your user account. If prompted for a yes or no, type 'y' and hit enter. With these commands you have navigated to the Desktop, and moved the kernel to the root folder, overwriting the old one.
• Reboot.

Step 5 - Graphics, Sound and Cleanup...

If you get a kernel panic when you reboot, DON'T PANIC! it is most likely because of the reinstallation of the Sleepenabler.kext. (Remember that pesky little thing?) If you get a line within the kernel panic screen that says something to the effect of pk.triaxis.Sleepenabler.kext, this is what happened. Enter in single user mode again, navigate to the /Volumes/System/Library/Extensions folder and remove it using the commands in Step 3. Remember to delete the Caches folder as well, you 'll get the same error of you don't.

So relax, Sparky. Calm down, and have some dip.

By this point you will only get 800x600 screen resolution. We're going to fix that, unless you like blocky graphics. I'm sure that would say something about your lineage, but I digress...

• Extract the IntelGMA950 archive and navigate to the Kexts, folder.
  
• Click on the top bar and Click, 'Go > Computer'.
• Navigate to System/Library/Extensions folder.
• Drag the following files from the Kexts folder into the System/Library/Extensions folder.
• You will be given a warning with a button that says, 'Authenticate'. Click this and enter your password.
• Go back to the IntelGMA950 kexts folder and navigate to the Utility folder, and click on the Kext Utility. You will be prompted for your password again.
  
• Let it do it's thing.

Now, before we reboot, if you have audio issues (namely that you don't have any), install the VoodooHDA package we put on the desktop. You might not have audio issues, but we downloaded the package just in case. The first time I did this, I had no sound. The second time, I didn't need it. Oh well, it's better to have it and not need it, than to need it and not have it.

• Reboot.
• If you get any kernel panics upon reboot, (you shouldn't, but if you do) use the directions in step 3 to remedy them.
  
• Once you get to the desktop again, you should be running at 1024x600 screen resolution, which look SO MUCH better. If not, reboot one more time.
  
• If you get to the Desktop and it's still not at 1024x600, then open a terminal again and enter the following commands;

cd /System/Library/Extensions

sudo rm -rf AppleIntel*

cd ..

sudo rm -rf Caches

• Enter your password when prompted, then repeat step 5.

Congratulations, you (should) now have a working MSI Wind u100 netbook running Mac OS X Snow Leopard 10.6.8.

Any questions or comments, shoot me an email at: theoneandtruebane@gmail.com.

Cheers...

Mac Os X For Msi Window 10

• Downloadempireefi_1085_atom.zipthen extract ISO and burn it to a CD. Start your computer using EmpireEFI CD. Wait for the menu screen to come up. Replace EmpireEFI CD with Snow Leopard 10.6.0 or 10.6.3 retail DVD. Wait for the DVD to spin up (20-30 seconds). Press F5 to refresh EmpireEFI menu. You should see Mac OS X Install DVD. Select it and press Enter. Continue with the Snow Leopard installation.
• Use Disk Utility to change your hard drive partition. Create 1 GUID partition for your OSX. Installation may take between 35 to 50 minutes.
• Reboot using EmpireEFI CD. At the menu select your installation hard drive. OSX will boot up and you will be presented with the Welcome Screen. Continue basic setup until you reach Desktop.
• Download and install 10.6.8 Combo Update. Wait for the 'The Installation was successful' message. DO NOT REBOOT !!! Leave this window open and continue to the next step.
• Deselect 'Use secure virtual memory' option (Applications > System Preferences > Security > General)

• Download hackintosh_msi_wind_u100_10.6.8_v3.4.zip package and extract it to your desktop. Package contains the following:
• Chameleon 2.0 RC5 r1526 (thanks Voodoo team)
• 10.6.8 kernel with Atom support enabled (thanks Tea)
• patched DSDT for BIOS Version: 1.0G (2010-01-04)
• all necessary kexts
• installer script

• Start Terminal (Application > Utilities > Terminal)

Mac Os X For Msi Windows

Become root:

Mac Os X For Msi Windows 10

Mac Os X For Msi Windows 7

After selecting your installation disk you will select option 'i' to start auto installer